ROLLER BRACKET ASSEMBLY REPAIR

TM-9-2350-292-20-2 Recovery Vehicle Heavy Full-Tracked: M88A2 (NSN 2350-01-390-4683) (EIC:ACQ) Manual
Page Navigation
593

TM 9--2350--292--20--2 0508 00--1 ROLLER BRACKET ASSEMBLY REPAIR 0508 00 THIS WORK PACKAGE COVERS: Removal, Disassembly, Assembly, Installation INITIAL SETUP: Tools and Special Tools General mechanic’s tool kit (item 1, WP 0717 00) Materials/Parts Spring pin (item 318, WP 0718 00) Lockwashers (5) (item 9, WP 0718 00) Self--locking nut (item 155, WP 0718 00) Equipment Conditions Limit switches removed (WP 0251 00) Removal 1. Remove screw (1) from plate (2) and roller guide (3). 2. Remove two screws (4), two lockwashers (5), two flat washers (6) and plate (2) from diamond screw (7). Discard lockwashers. 3. Remove three screws (8), three lockwashers (9) and three flat washers (10). Discard lockwashers. 4. Remove self--locking nut (11), flat washer (12), screw (13), flat washer (14) and roller bracket assembly (15) from mounting bracket (16). Discard self--locking nut. Figure 269 1 2 3 4 5 6 8 9 7 11 10 15 14 13 16 12

Privacy Statement
Press Release
Contact