TM 9--2350--292--20--2
MAIN WINCH DRUM AND DIAMOND SCREW SYNCHRONIZATION
ADJUSTMENT -- CONTINUED
0505 00
Adjustment--Continued
8. Start APU and move system selector control valve handle to AUX position (TM 9--2350--292--10).
NOTE
If level wind cylinder does not move apply light PAYIN
pressure to main winch control lever until level wind cylin-
der moves.
9. Using a long screwdriver, move roller guide (15) left or right until roller guide shoulder bolt hole (16) lines up with
bracket (17).
10. Shut down APU (TM 9--2350--292--10).
11. Apply sealing compound to threads of shoulder screw (18).
12. Secure bracket (17) to roller guide (15) with shoulder screw (18).
Figure 269
17
15
18
16 (HIDDEN)
NOTE
FOLLOW--ON MAINTENANCE:
Main winch and cable guide synchronized
(WP 0506 00).
END OF TASK
0505 00--3/4 blank
