MAIN WINCH DRUM AND DIAMOND SCREW SYNCHRONIZATION ADJUSTMENT

TM-9-2350-292-20-2 Recovery Vehicle Heavy Full-Tracked: M88A2 (NSN 2350-01-390-4683) (EIC:ACQ) Manual
Page Navigation
586

TM 9--2350--292--20--2 0505 00--1 MAIN WINCH DRUM AND DIAMOND SCREW SYNCHRONIZATION ADJUSTMENT 0505 00 THIS WORK PACKAGE COVERS: Adjustment INITIAL SETUP: Tools and Special Tools General mechanic’s tool kit (item 1, WP 0717 00) Main winch ground hop kit (item 26, WP 0717 00 or item 128, WP 0717 00) Combination square (item 74, WP 0717 00) Steel rule (item 73, WP 0717 00) Materials/Parts Sealing compound (item 78, WP 0716 00) Wiping rags (item 7, WP 0716 00) Equipment Conditions Main winch ground hop kit installed (WP 0498 00) Diamond screw centered (WP 0504 00) Personnel Required Two Adjustment 1. Rotate drum (1) until cable pocket (2) is in the horizontal (top) position and the timing marks on the drum flange (3) and motor end winch housing (4) are aligned. Figure 269 2 1 3 4 2

Privacy Statement
Press Release
Contact