TM 9--2350--292--20--2
LAYER LIMIT SWITCHES ADJUSTMENT -- CONTINUED
0503 00
Adjustment--Continued
NOTE
The right side layer limit switch is not re--adjusted for
position of the upper roller. The right side of the upper
roller is sized to activate the payout limit switch. Leave
the right side layer limit switch setting as it was set after
step 12.
15. Payout main winch under tension at least three wraps. Pay in main winch without tension to comfirm that layer
limit switches do not activate. If any switch activates, repeat steps 2 through 15.
NOTE
FOLLOW--ON MAINTENANCE:
Disconnect main winch ground hop kit (WP 0498 00)
Install main winch and spade assembly (WP 0497 00)
END OF TASK
0503 00--7/8 blank
