TM 9--2350--292--20--2
0503 00--3
LAYER LIMIT SWITCHES ADJUSTMENT -- CONTINUED
0503 00
Adjustment--Continued
7. Rotate main winch until high spot is midway between upper roller support tube (6) and lower roller support tube
(7).
8. Loosen left (8) and right (9) layer limit switch bracket attachment screws (10).
9. For both left (8) and right (9) layer limit switch, center nylon roller (3) in “V” formed between upper (2) and lower
(11) spring guide brackets and tighten left (8) and right (9) layer limit switch bracket attachment screws (10) to 72
lb--in (8.14 N m).
10. Rotate main winch until the high spot is under the lower roller (12).
Figure 264
3
8
11
6
9
10
12
7
10
2
