TM 9--2350--292--20--2
0508 00--2
ROLLER BRACKET ASSEMBLY REPAIR -- CONTINUED
0508 00
Disassembly
1. Remove spring pin (17) from roller guide (3). Discard spring pin.
2. Remove shaft (18) from roller guide (3) and bracket (19).
3. Remove two bushings (20) from bracket (19).
4. Inspect parts for damage and replace as required.
Assembly
1. Install two bushings (20) in bracket (19).
2. Install shaft (18) and roller guide (3) on bracket (19).
3. Align spring pin hole in roller guide (3) with hole in shaft (18), install new spring pin (17).
Figure 268
3
19
20
20
17
18
