TM 9--2350--292--20--2
0516 00--2
AUXILIARY WINCH HYDRAULIC MOTOR AND FLANGE REPLACEMENT --
CONTINUED
0516 00
Installation
1. Install hydraulic motor assembly (3) and new preformed packing (9) on auxiliary winch assembly (8).
2. Install four screws (6) and four new lockwashers (7) to hydraulic motor assembly (3) and auxiliary winch assembly
(8).
3. Install two new preformed packings (5) in two flanges (4).
4. Install two flanges (4) with two new preformed packings (5) on hydraulic motor assembly (3) with eight screws (1)
and eight new lockwashers (2).
Figure 271
8
1
2
5
4
2
1
9
3
6
7
4
5
NOTE
FOLLOW--ON MAINTENANCE:
Install fittings and connect hoses to hydraulic motor
(WP 0514 00)
Refill auxiliary winch with gear oil (WP 0187 00)
Install auxiliary winch wire rope assembly
(WP 0515 00)
END OF TASK
