TM 9--2350--292--20--2
0517 00--2
AUXILIARY WINCH SPOOLING ROLLER ASSEMBLY REPAIR -- CONTINUED
0517 00
Disassembly
1. Remove two cotter pins (9) from two threaded rods (10). Discard cotter pins.
2. Remove two locknuts (11) and two flat washers (12) from two threaded rods (10). Discard locknuts.
3. Remove plate (13), two springs (14) and two flat washers (15) from two threaded rods (10).
4. Remove auxiliary winch spacer bar (3) and roller (16) from two arms (17).
CAUTION
Do not remove bearings unless bearing replacement is
necessary. Bearings will be damaged during removal.
5. Remove two bearings (18) from roller (16).
6. Remove two spring pins (19) and two threaded rods (10) from two arms (17). Discard spring pins.
7. Remove two lubrication fittings (20) and two bushings (21) from two arms (17).
8. Inspect parts for damage and replace as required.
Figure 274
9
3
17
17
19
10
15
14
12
11
13
18
16
18
21
20
20
21