TM 9--2350--292--20--2
0517 00--3
AUXILIARY WINCH SPOOLING ROLLER ASSEMBLY REPAIR -- CONTINUED
0517 00
Assembly
1. Install two bushings (21) and two lubrication fittings (20) in two arms (17).
2. Install two threaded rods (10) in two arms (17) with two new spring pins (19).
3. Install two new bearings (18) in roller (16), if bearings were removed.
4. Install auxiliary winch spacer bar (3) and roller (16) on two arms (17).
5. Install two flat washers (15), two springs (14) and plate (13) on two threaded rods (10).
6. Install two new locknuts (11) and two flat washers (12) on two threaded rods (10). Thread locknuts (11) past holes
in threaded rods (10).
7. Install two new cotter pins (9) in two threaded rods (10).
Figure 274
9
3
17
17
19
10
15
14
12
11
13
18
16
18
21
20
20
21
