HYDRAULIC CONTROL VALVE MANIFOLD SHIELDS AND SPADE CONTROL VALVE ROD AND HANDLE REPLACEMENT

TM-9-2350-292-20-2 Recovery Vehicle Heavy Full-Tracked: M88A2 (NSN 2350-01-390-4683) (EIC:ACQ) Manual
Page Navigation
634

TM 9--2350--292--20--2 0519 00--1 HYDRAULIC CONTROL VALVE MANIFOLD SHIELDS AND SPADE CONTROL VALVE ROD AND HANDLE REPLACEMENT. 0519 00 THIS WORK PACKAGE COVERS: Removal, Installation INITIAL SETUP: Tools and Special Tools General mechanic’s tool kit (item 1, WP 0717 00) Materials/Parts Lockwashers (4) (item 9, WP 0718 00) Cotter pins (2) (item 5, WP 0718 00) Lockwashers (4) (item 10, WP 0718 00) Lockwashers (17) (item 2, WP 0718 00) Lockwashers (4) (item 12, WP 0718 00) Hardwood lumber (item 5, WP 0716 00 ) Adhesive (item 83, WP 0716 00) Cleaning compound (item 91, WP 0716 00) Equipment Conditions Hydraulic control panel removed (WP 0245 00) Main switch panel removed (WP 0422 00) Hydraulic control valves handles removed (WP 0560 00) Subfloor plates #4 and #12 removed (WP 0454 00) NOTE Disassemble equipment only to the extent necessary to effect repairs. Removal 1. Remove four screws (1), four lockwashers (2), four flat washers (3) and two locks (4). Discard lockwashers. 2. Loosen nut (5), remove handle (6), rod (7) and nut (5) from connector (8). 5 6 7 1 1 2 2 3 3 4 4 8

Privacy Statement
Press Release
Contact