TM 9--2350--292--20--2
0519 00--6
HYDRAULIC CONTROL VALVE MANIFOLD SHIELDS AND SPADE CONTROL
VALVE ROD AND HANDLE REPLACEMENT -- CONTINUED
0519 00
Installation--Continued
15. Install two brackets (13) with four screws (14) and four new lockwashers (15).
16. Install two screws (11) and two nuts (12) in two brackets (13).
17. Install connector (8) with pin (10) and two new cotter pins (9).
18. Install handle (6), rod (7) and nut (5) on connector (8).
19. Install two locks (4) with four screws (1), four new lockwashers (2) and four flat washers (3).
Figure 275
6
7
5
8
13
13
14
14
15
15
12
11
4
4
3
2
1
3
2
11
12
10
9
1
NOTE
FOLLOW--ON MAINTENANCE:
Install hydraulic control valve handles (WP 0560 00)
Install main switch panel (WP 0422 00)
Install hydraulic control panel (WP 0245 00)
Install subfloor plates #4 and #12 (WP 0454 00)
END OF TASK
