SPADE ASSEMBLY REPAIR

TM-9-2350-292-20-2 Recovery Vehicle Heavy Full-Tracked: M88A2 (NSN 2350-01-390-4683) (EIC:ACQ) Manual
Page Navigation
644

TM 9--2350--292--20--2 0522 00--1 SPADE ASSEMBLY REPAIR 0522 00 THIS WORK PACKAGE COVERS: Removal, Disassembly, Assembly, Installation INITIAL SETUP: Tools and Special Tools General mechanic’s tool kit (item 1, WP 0717 00) Hydraulic impact wrench (item 108, WP 0717 00) Socket wrench socket (item 107, WP 0717 00) Socket wrench socket (item 109, WP 0717 00) Open--end wrench (item 105, WP 0717 00) Materials/Parts Lockwashers (12) (item 316, WP 0718 00) Lockwashers (2) (item 2, WP 0718 00) Self--locking nuts (5) (item 317, WP 0718 00) Hardwood lumber (item 5, WP 0716 00) Equipment Conditions Spade lowered to ground (TM 9--2350--292--10) Personnel Required Two References TM 9--2350--292--10 Removal WARNING Position wooden blocks under spade to prevent spade from rolling backward. Failure to comply may result in injury to personnel. Remove six screws (1) and six lockwashers (2) securing each spade arm (3) to spade assembly (4). Discard lock- washers. Figure 279 1 2 3 2 1 4

Privacy Statement
Press Release
Contact