TM 9--2350--292--20--2
SPADE ASSEMBLY REPAIR -- CONTINUED
0522 00
Installation
WARNING
To prevent personnel injury or possible death, ensure ve-
hicle brakes are locked and transmission is in park, be-
fore aligning spade arm.
1. Start vehicle (TM 9--2350--292--10) and align spade arm (3) mounting holes with mounting holes in spade assem-
bly (4), secure each arm (3) with six screws (1) and six new lockwashers (2).
2. Check operation of spade locking mechanism (12) (TM 9--2350--292--10). There should be minimal play between
strike plate (10) and spade locking mechanism (12). Adjust with shim(s) (11) accordingly.
Figure 279
3
1
2
2
1
4
12
11
10
NOTE
FOLLOW--ON MAINTENANCE:
Place spade assembly in raised/locked position
(TM 9--2350--292--10)
END OF TASK
0522 00--3/4 blank
