TM 9--2350--292--20--2
SPADE LOCK ASSEMBLY REPLACEMENT -- CONTINUED
0521 00
Installation
1. Install safety valve (9) in spade lock housing (5).
2. Install lubrication fitting (8) in spade lock housing (5).
3. Apply sealing compound to threads of all hose ends prior to installation.
4. Install quick--disconnect coupling (2) on hydraulic hose (1).
5. Connect hydraulic hose (1) to hydraulic cylinder (7).
6. Install spade lock housing (5) to vehicle hull front cover assembly (6) with eight screws (3) and eight new lock-
washers (4).
7. Connect spade lock hydraulic hose (1) quick--disconnect coupling (2).
Figure 277
4
3
5
2
1
7
8
9
6
NOTE
FOLLOW--ON MAINTENANCE:
Install floor plate #10 (WP 0454 00)
Lubricate spade lock (WP 0187 00)
Raise spade (TM 9--2350--292--10)
END OF TASK
0521 00--3/4 blank