TM 9--2350--292--20--2
0519 00--5
HYDRAULIC CONTROL VALVE MANIFOLD SHIELDS AND SPADE CONTROL
VALVE ROD AND HANDLE REPLACEMENT -- CONTINUED
0519 00
Installation--Continued
6. Install plate (35) with six screws (33) and four new lockwashers (34).
7. Clean plate (29) with cleaning compound.
8. Trim new grommet (28) to fit slot in plate (29).
9. Apply adhesive to plate (29).
10. Install grommet (28) in slot on plate (29).
11. Install plate (29) with three screws (30), three new lockwashers (31) and three flat washers (32).
12. Install plate (27) with two screws (24), two new lockwashers (25) and two flat washers (26).
13. Install plate (23) with two screws (20), two new lockwashers (21) and two flat washers (22).
14. Install plate (19) with two screws (16), two new lockwashers (17) and two flat washers (18).
Figure 275
33
35
20
21
22
23
33
34
25
24
18
17
16
19
27
26
32
31
30
29
25
24
26
28
