TM 9--2350--292--20--2
0519 00--3
HYDRAULIC CONTROL VALVE MANIFOLD SHIELDS AND SPADE CONTROL
VALVE ROD AND HANDLE REPLACEMENT -- CONTINUED
0519 00
Removal--Continued
12. Remove two studs (36) and four studs (37) from hydraulic control valve manifold (38).
WARNING
13. Use hardwood lumber to support the rear of the hydraulic control valve manifold (38).
14. Remove two screws (39), two lockwashers (40), two flat washers (41) and spacer (42), if installed, from two
brackets (43 and 44). Discard lockwashers.
15. Remove two screws (45), two lockwashers (46), two flat washers (47) and bracket (43). Discard lockwashers.
16. Remove two screws (48), two lockwashers (49), two flat washers (50) and bracket (44). Discard lockwashers.
17. Inspect parts for damage and replace as required.
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
