TM 9--2350--292--20--2
0519 00--4
HYDRAULIC CONTROL VALVE MANIFOLD SHIELDS AND SPADE CONTROL
VALVE ROD AND HANDLE REPLACEMENT -- CONTINUED
0519 00
Installation
1. Install bracket (44) with two screws (48), two new lockwashers (49) and two flat washers (50).
2. Install bracket (43) with two screws (45), two new lockwashers (46) and two flat washers (47).
3. Install two screws (39), two new lockwashers (40), two flat washers (41) and spacer (42), if removed, on two
brackets (43 and 44).
4. Remove hardwood lumber used to support the rear of the hydraulic control valve manifold (38).
5. Install two studs (36) and four studs (37) in hydraulic control valve manifold (38).
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50