TM 9--2350--292--20--2
0522 00--2
SPADE ASSEMBLY REPAIR -- CONTINUED
0522 00
Disassembly
WARNING
NOTE
Maintenance procedures for left and right spade exten-
sions are the same. This task replaces one extension.
1. Remove five screws (5), five self--locking nuts (6) and spade extension (7) from spade assembly (4). Discard
self--locking nuts.
NOTE
Note the quantity and position of shim(s) being removed
to ensure shim(s) are installed in the same position.
2. Remove two screws (8), two lockwashers (9), strike plate (10) and shim(s) (11) from spade assembly (4). Discard
lockwashers.
3. Inspect parts for damage and replace as required.
Assembly
1. Install strike plate (10) and shim(s) (11) with two screws (8) and two new lockwashers (9).
2. Install spade extension (7) on spade assembly (4) with five screws (5) and five new self--locking nuts (6).
Figure 279
5
7
6
4
11
10
9
8
6
5
7