TM 9--2350--292--20--2
0548 00--1
AUXILIARY POWER UNIT HYDRAULIC PUMP REPAIR (HATZ)
0548 00
THIS WORK PACKAGE COVERS:
Removal, Disassembly, Assembly, Installation
INITIAL SETUP:
Tools and Special Tools
General mechanic’s tool kit (item 1, WP 0717 00)
Combination wrench (item 30, WP 0717 00)
Materials/Parts
Preformed packings (2) (item 475, WP 0718 00)
Lockwashers (2) (item 18, WP 0718 00)
Lockwashers (4) (item 2, WP 0718 00)
Lockwasher (item 12, WP 0718 00)
Self--locking nut (item 282, WP 0718 00)
Adhesive (item 29, WP 0716 00)
Materials/Parts--Continued
Adhesive (item 81, WP 0716 00)
Sealing compound (item 16, WP 0716 00)
Equipment Conditions
APU removed from vehicle (WP 0587 00 or
WP 0586 00)
APU chain case oil drained (WP 0187 00)
APU vaneaxial fan bracket removed (WP 0666 00)
Personnel Required
Two
CAUTION
To prevent contamination, cap or plug all open hydraulic
ports and fittings immediately after removing parts.
NOTE
Where applicable, remove adhesive to expose desig-
nated electrical terminals.
Removal
1. Remove self--locking nut (1), flat washer (2), wiring harness 3W711 wire 62 (3) and lead assembly 3W706 (4)
from terminal B of generator (5). Discard self--locking nut.
1
2
3
4
5
