Assembly - TM-9-2350-292-20-2

TM-9-2350-292-20-2 Recovery Vehicle Heavy Full-Tracked: M88A2 (NSN 2350-01-390-4683) (EIC:ACQ) Manual
Page Navigation
712

TM 9--2350--292--20--2 0548 00--6 AUXILIARY POWER UNIT HYDRAULIC PUMP REPAIR (HATZ) -- CONTINUED 0548 00 Assembly NOTE Assembly procedures can be performed in a suitable work area (workbench) away from the APU. Perform steps 1 and 2 to assemble fittings and hose for installation on input side of hydraulic pump. Perform steps 3 through 8 to assemble fittings for instal- lation on output side of hydraulic pump. 1. Apply sealing compound to threads of all fittings and hoses prior to assembly. 2. Install hose assembly (26) on tube elbow (13). 3. Install pipe nipple (34) and valve (32) in pipe tee (29). 4. Install coupling half (30) on adapter (31) and adapter (31) into valve (32). 5. Install coupling half (27) on elbow (28). 6. Install elbow (28) in pipe tee (29). 7. Install adapter (33) on pipe nipple (34). 8. Connect tube elbow (18) to adapter (33). 26 13 27 31 28 30 32 29 33 34 18

Privacy Statement
Press Release
Contact