Removal - TM-9-2350-292-20-2

AUXILIARY POWER UNIT HYDRAULIC PUMP REPAIR (HATZ)

TM-9-2350-292-20-2 Recovery Vehicle Heavy Full-Tracked: M88A2 (NSN 2350-01-390-4683) (EIC:ACQ) Manual
Page Navigation
708

TM 9--2350--292--20--2 0548 00--2 AUXILIARY POWER UNIT HYDRAULIC PUMP REPAIR (HATZ) -- CONTINUED 0548 00 Removal--Continued 2. Remove two nuts (6), two lockwashers (7) and U--bolt (8) from bracket (9). Discard lockwashers. 3. Remove screw (10), lockwasher (11), flat washer (12) and bracket (9) from APU assembly. Discard lockwasher. 4. Disconnect tube elbow (13) from tube elbow (14). 5. Disconnect tube elbow (14) from adapter union (15). 6. Remove adapter union (15) and preformed packing (16) from pump (17). Discard preformed packing. NOTE Refer to disassembly procedures to further disassemble the removed fittings and hose on the input port side of the hydraulic pump. 7. Disconnect tube elbow (18) from adapter (19). 8. Remove adapter (19) and preformed packing (20) from pump (17). Discard preformed packing. 10 11 12 17 8 15 16 14 13 9 18 20 19 7 6

Privacy Statement
Press Release
Contact