TM 9--2350--292--20--2
0549 00--2
MAIN WINCH SAFETY VALVES REPLACEMENT -- CONTINUED
0549 00
Installation
1. Install two main winch safety valves (10), spacer (11), and two ground leads (5) on vehicle hull with two screws
(7), two new lockwashers (8) and two flat washers (9).
2. Install two ground leads (5) on two threaded rods (6) with two locknuts (4).
3. Install two wiring harness wires 359B (2) on two threaded rods (3) with two locknuts (1).
Figure 298
8
8
2
1
1
3
3
10
5
10
4
5
4
7
9
7
9
6
6
11
2
NOTE
FOLLOW--ON MAINTENANCE:
Install hydraulic lines and fittings on main winch safety
valves (WP 0567 00)
Install subfloor plate #18 (WP 0454 00)
END OF TASK
