TM 9--2350--292--20--2
0550 00--3
HYDRAULIC FILTER MANIFOLD ASSEMBLY REPAIR -- CONTINUED
0550 00
Disassembly
1. Remove four screws (7), four lockwashers (8), four flat washers (9) and plate (5) from filter manifold assembly
(1). Discard lockwashers.
2. Remove four screws (10), block (6) and preformed packing (11) from filter manifold assembly (1). Discard pre-
formed packing.
3. Inspect parts for damage and replace as required.
Assembly
WARNING
1. Clean all parts with dry--cleaning solvent and clean cloth.
WARNING
2. Apply a thin coat of lubricant to new preformed packing (11).
3. Install block (6) on filter manifold assembly (1) with new preformed packing (11) and four screws (10).
4. Install plate (5) on filter manifold assembly (1) with four screws (7), four new lockwashers (8) and four flat wash-
ers (9).
Figure 299
6
7
8
9
11
10
5
1
