HYDRAULIC FILTER MANIFOLD RETURN CIRCUIT OR CHARGE CIRCUIT INDICATOR SWITCH REPLACEMENT

TM-9-2350-292-20-2 Recovery Vehicle Heavy Full-Tracked: M88A2 (NSN 2350-01-390-4683) (EIC:ACQ) Manual
Page Navigation
727

TM 9--2350--292--20--2 0553 00--1 HYDRAULIC FILTER MANIFOLD RETURN CIRCUIT OR CHARGE CIRCUIT INDICATOR SWITCH REPLACEMENT 0553 00 THIS WORK PACKAGE COVERS: Removal, Installation INITIAL SETUP: Tools and Special Tools General mechanic’s tool kit (item 1, WP 0717 00) Torque wrench (item 21, WP 0717 00) Materials/Parts Lubricant (item 51, WP 0716 00) Nonelectrical wire (item 284, WP 0718 00) Preformed packing (item 40, WP 0718 00) Preformed packing (item 305, WP 0718 00) Retainer packing (item 306, WP 0718 00) Safety goggles (item 93, WP 0716 00) Marker tags (item 49, WP 0716 00) Sealing compound (item 78, WP 0716 00) Equipment Conditions Subfloor plate #22 removed (WP 0454 00) Boom in full forward position (TM 9--2350--292--10) Spade in locked or fully lowered position (TM 9--2350--292--10) Hydraulic system depressurized (WP 0054 00) Vehicle MASTER switch OFF (TM 9--2350--292--10) Battery power disconnected (WP 0256 00) References TM 9--2350--292--10 WARNING WARNING Removal NOTE Tag all electrical connections and electrical leads prior to removal to aid in installation. 1. Disconnect wiring harness 2W601 connector P3 (1) from return circuit indicator switch (2) or disconnect wiring harness 2W601 connector P4 (3) from charge circuit indicator switch (4). Figure 300 FORWARD 2 1 3 4

Privacy Statement
Press Release
Contact