Installation - TM-9-2350-292-20-2

FLOW REGULATING VALVE AND FITTINGS REPLACEMENT

TM-9-2350-292-20-2 Recovery Vehicle Heavy Full-Tracked: M88A2 (NSN 2350-01-390-4683) (EIC:ACQ) Manual
Page Navigation
731

TM 9--2350--292--20--2 HYDRAULIC OIL FILTERS REPLACEMENT -- CONTINUED 0554 00 Installation--Continued WARNING 4. Apply a thin coat of lubricant on new preformed packing (4). 5. Seat new return filter (3) and new preformed packing (4) in filter manifold (2). 6. Install return filter bowl (1) on filter manifold (2). Hand tighten filter bowl. 7. Check hydraulic reservoir fluid level (TM 9--2350--292--10). 8. Start engine, pressurize hydraulic system (TM 9--2350--292--10). Check for leaks, hand tighten filter bowls if nec- essary. Check hydraulic reservoir fluid level (TM 9--2350--292--10). Figure 300 1 2 3 4 NOTE FOLLOW--ON MAINTENANCE: Install subfloor plates #28 and #22 (WP 0454 00) END OF TASK 0554 00--3/4 blank

Privacy Statement
Press Release
Contact