TM 9--2350--292--20--20360 00--4HYDRAULIC BRAKE HOSE ASSEMBLY REPLACEMENT(OLD CONFIGURATION) -- CONTINUED0360 00Removal--Continued13. Remove one end of hose assembly (38), adapter (39) and preformed packing (40) from port ROUT of powerboost manifold (11). Discard preformed packing.14. Remove other end of hose assembly (38) from filter manifold tee (41).15. Remove one end of hose assembly (42) from adapter (43) in port PS of power boost manifold (11).16. Remove other end of hose assembly (42) from adapter (44) in pressure switch (45).17. Inspect parts for damage and replace as required.Installation1. Install one end of hose assembly (42) in adapter (44) of pressure switch (45).2. Install other end of hose assembly (42) in adapter (43) of port PS of power boost manifold (11).3. Install one end of hose assembly (38) in filter manifold tee (41).4. Apply a thin even coat of clean lubricant to all new preformed packings prior to installation.5. Install other end of hose assembly (38), adapter (39) and new preformed packing (40) in port ROUT of powerboost manifold (11).Figure 16711FORWARD4138394043424445
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
