TM 9--2350--292--20--2
0361 00--1
HYDRAULIC BRAKE HOSE ASSEMBLY, BLEED VALVE MANIFOLD AND
ASSOCIATED PARTS REPLACEMENT (NEW CONFIGURATION)
0361 00
THIS WORK PACKAGE COVERS:
Removal, Installation
INITIAL SETUP:
Tools and Special Tools
General mechanic’s tool kit (item 1, WP 0717 00)
Combination wrench (item 30, WP 0717 00)
Materials/Parts
Dust protective cap (item 10, WP 0716 00)
Dust protective plugs (3) (item 11, WP 0716 00)
Dust protective plugs (24) (item 12, WP 0716 00)
Dust protective caps (2) (item 44, WP 0716 00)
Dust protective plugs (2) (item 14, WP 0716 00)
Preformed packings (2) (item 20, WP 0718 00)
Preformed packing (item 21, WP 0718 00)
Preformed packings (11) (item 22, WP 0718 00)
Lubricant (item 51, WP 0716 00)
Preformed packing (item 43, WP 0718 00)
Lockwashers (4) (item 9, WP 0718 00)
Materials/Parts -- Continued
Lockwasher (item 2, WP 0718 00)
Preformed packing (item 23, WP 0718 00)
Wiping rags (item 7, WP 0716 00)
Safety goggles (item 93, WP 0716 00)
Equipment Conditions
Vehicle parked on a level surface with tracks blocked
and brakes released (TM 9--2350--292--10)
Subfloor plates #13, #16, #18 and #22 removed
(WP 0454 00)
Interior stowage baskets removed (WP 0465 00)
Hydraulic reservoir drained (WP 0187 00)
References
TM 9--2350--292--10
WARNING
WARNING
Do not work on hydraulic lines or fittings when system is
pressurized. Hydraulic fluid under pressure can cause
personnel injury. Depressurize brake system by stepping
on the brake pedal several times to bleed off the hydrau-
lic pressure. Make sure brake pressure gauge indicates
zero.
CAUTION
Cap all hydraulic lines and plug all hydraulic ports to pre-
vent contamination. Failure may result in damage to the
hydraulic system.
