Installation - TM-9-2350-292-20-2

HYDRAULIC BRAKE HOSE ASSEMBLY, BLEED VALVE MANIFOLD AND ASSOCIATED PARTS REPLACEMENT (NEW CONFIGURATION) - TM-9-2350-292-20-2_96

TM-9-2350-292-20-2 Recovery Vehicle Heavy Full-Tracked: M88A2 (NSN 2350-01-390-4683) (EIC:ACQ) Manual
Page Navigation
69

TM 9--2350--292--20--2 0360 00--6 HYDRAULIC BRAKE HOSE ASSEMBLY REPLACEMENT (OLD CONFIGURATION) -- CONTINUED 0360 00 Installation--Continued 14. Install one end of hose assembly (8), adapter (12) and new preformed packing (13) in port OUTLET of pump and motor assembly (4). 15. Install other end of hose assembly (8), adapter (9) and new preformed packing (10) in port PIN of power boost manifold (11). 16. Install one end of hose assembly (1), adapter (5) and new preformed packing (6) in reservoir (7). 17. Install other end of hose assembly (1), adapter (2) and new preformed packing (3) in port INLET of pump and mo- tor assembly (4). 18. Fill reservoir (7) to the proper level with lubricant (WP 0187 00). 19. Power up hydraulic system (TM 9--2350--292--10) and check for leaks. Repair as necessary. 20. Bleed air from brake system (WP 0355 00). Figure 167 1 2 3 4 5 6 7 8 9 10 11 12 13 8 NOTE FOLLOW--ON MAINTENANCE: Install interior stowage baskets (WP 0465 00) Install subfloor plates #13, #16, #18 and #22 (WP 0454 00) END OF TASK

Privacy Statement
Press Release
Contact