TM 5-4240-501-14P
IGNITION
Magna-Matic
Fig. 42 - Removing Bushing and Plunger
To Install Bushing and Plunger
Insert the plunger in the new bushing as shown in
Fig. 43.
Fig. 43 - Inserting New Plunger in Bushing
Fig. 44 - Inserting Plunger and Bushing in Cylinder
Insert plunger and bushing into the cylinder. Use a
hammer and the old bushing to drive the new bushing
into the cylinder until the new bushing is flush with the
face of the cylinder. Check to be sure the plunger
operates freely. Fig. 44.
MAGNA-MATIC SYSTEM
Engine Models 9-14-19-23-191000-231000
Fig. 45 - Magna-Matic System
Remove Flywheel
Use puller 19203 or 19068, running puller screws into
holes tapped into flywheel. Continue to tighten screws
until flywheel loosens. Fig. 46.
NOTE: Use flywheel nut to protect crankshaft threads.
Fig. 46 - Removing Flywheel
2
12
