TM 9-2350-238-10
EMERGENCY OPERATION OF CRANE
AND SPADE–CONTINUED
TRAVERSING CAB
Releasing cab traversing brake will allow cab
to be pulled into desired position.
1
2
3
4
NOTE
Make sure that boom and tow
winch cables are secure and
boom is lowered before releas-
ing brake and traversing cab.
Pull brake pressure selector valve (1) out.
Operate hydraulic ram hand pump (2) un-
til traversing brake is released.
Continue to operate hydraulic ram hand
pump (2). Traverse cab into desired posi-
tion by pushing on boom or pulling on
boom with an attached line.
When cab is in desired position, push
selector valve (1) in. This will set tra-
versing brake.
RAISING SPADE
Connecting hydraulic ram hand pump to im-
pact wrench controls with impact wrench
hose will provide pressure to raise spade.
1 Connect impact wrench hose (1) to large
quick disconnect coupling (2) on impact
wrench flow regulator manifold.
2-90
