TM 9-2350-256-20-1
0085 00
CORRECTIVE ACTION Continued
13. Disconnect wire 325 from indicator light. Place red lead of multimeter in wire 325 and black lead
to ground. Turn MASTER and FLASHER switches ON and check for voltage. Turn MASTER and
FLASHER switches OFF. If voltage is present, replace indicator lamp (see WP 0160 00). If voltage is
not present, go to step 14.
14. Disconnect turn signal flasher wiring harness from flasher unit. Place red lead of multimeter in socket
B of wire 325 and black lead to ground. Turn MASTER and FLASHER switches ON and check for
voltage. Turn MASTER and FLASHER switches OFF. If voltage is present, replace flasher unit (see
WP 0160 00). If voltage is not present, go to step 15.
0085 00-10
