TM 9-2350-256-20-1
0085 00
CORRECTIVE ACTION Continued
15. Reconnect turn signal flasher wiring harness to flasher unit. Disconnect wire 325 from flasher side
of FLASHER switch. Place red lead of multimeter on terminal of switch and black lead to ground.
Turn MASTER and FLASHER switches ON and check for voltage. Turn MASTER and FLASHER
switches OFF. If voltage is not present, go to step 16. If voltage is present, repair/replace wire 325 of
turn signal flasher wiring harness from FLASHER switch to the flasher (see WP 0216 00).
16. Reconnect wire 325 to flasher side of FLASHER switch. Disconnect wire 325 of red flasher breaker to
switch wiring harness from circuit breaker side of FLASHER switch. Place red lead of multimeter in
of wire 325 and black lead to ground. Turn MASTER switch on and check for voltage. Turn MASTER
switch OFF. If voltage is present, replace FLASHER switch (see WP 0160 00). If voltage is not present,
go to step 17.
0085 00-11
