TM 9-2350-256-20-2
UNIT MAINTENANCE
RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1
NSN 2350-00-122-6826, EIC AQA
TYPICAL FEMALE-TYPE PANEL MOUNTING RECEPTACLE REPAIR
DISASSEMBLY, ASSEMBLY
INITIAL SETUP:
Tools and Special Tools
References
Tool kit, general mechanic's (item 59, WP 0490 00)
TB SIG 222
Materials/Parts
Rod (item 28, WP 0489 00)
WARNING
Be certain MASTER switch is OFF when working on electrical system to avoid electrical shock and
burns.
NOTE
In plug and receptacle assemblies, plug all spare grommet holes with rod.
Disassembly
1.
Drive socket contact (1) out through rear of insert (2) with pin extractor.
2.
Unsolder cable leads (3) from solder wells on socket contacts (1).
3.
Slide insert (2) out through rear of shell (4).
Assembly
1.
Strip cable (3) insulation equal to depth of solder wells of socket contacts (1).
2.
Insert cable leads (3) into solder wells of socket contacts (1) and solder (use resin core solder only) (refer to TB SIG 222).
3.
Push insert (2) into shell (4) from rear until seated. Groove (5) in insert must be aligned with guide in shell (4) to ensure
proper fit.
4.
Push socket contacts (1) into insert (2) from rear until seated.
END OF WORK PACKAGE
0259 00-1/2 blank
