SECTION V: CONTROLS AND LINKAGES
TM 9-2350-256-20
7
Disconnect connecting link (17) from lever (18) by
removing screw (19) and lockwasher (20).
8
Remove bracket (21) and bearing housing (22) by
removing two screws (23) and two lockwashers (24).
9
Remove bearing housing (25) by removing two screws
(26) and two lockwashers (27).
10 Slide two bearing housings (22 and 25) and washer
(28) from shaft assembly (29).
11 Remove two retainers (30) and two bearings (31) from
bearing housings (22 and 25).
12 Remove two screws (32), two lockwashers (33), two
keys (34), and two levers (35 and 18) from shaft
assembly (29).
9-147
