CHAPTER 9: MAINTENANCE OF HULL- AND CAB-RELATED COMPONENTS
TM 9-2350-256-20
9-72 REPLACE/REPAIR STEERING CONTROLS AND LINKAGES--Continued
7
Install each end of connecting links (58,59, and 60) with new lockwasher (62) and screw (61).
NOTE
Linkages must be completely installed and aligned and rubber bellows must be adjusted
(see paragraph 9-73) before cementing rubber bellows in place.
8
Install rubber bellows (54) on connecting link (51) with bushing (57) and clamp (56).
9
Insert connecting link (51) through bulkhead (55).
10 Connect end of connecting link (51) to bell crank assembly (72) with new lockwasher (53) and screw (52).
11 Install rod end bearing (45) to connecting link (51) with nut (50).
9-152
