CHAPTER 9: MAINTENANCE OF HULL-AND CAB-RELATED COMPONENTS
TM 9-2350-256-20
9-76
REPLACE/REPAIR SHIFTING CONTROLS AND LINKAGES--Continued
13
Install shaft (37) to two bearing units (40).
14
Install two fittings (47).
15
Install two bearing units (40), shims (41), two spacers (42), and bracket (43) by installing two washers (46), two
new lockwashers (45), and two screws (44) to each bearing unit.
16
Install two levers (21 and 35) and two keys (36) to shaft (37) by installing new lockwasher (39) and screw (38) to
each lever.
17
Install new lockwasher (34) and screw (33).
18
Install transmission shift control assembly (8) and shims (27) with two flat washers (32), two new lockwashers (31),
two screws (30), four new lockwashers (29), and four screws (28).
19
Install nut (26) and bearing (25) to each end of stud assembly (20). Install stud assembly to levers (21 and 22) with
two new lockwashers (24) and two screws (23).
9-168