TM 9-2350-256-20CHAPTER 9:MAINTENANCE OF HULL- AND CAB-RELATED COMPONENTS9-81 REPLACE/REPAIR BRAKE PEDAL AND BRACKET ASSEMBLY—Continuedc. ASSEMBLY1Install pin (63) to bracket (34).2Install screw (61) and nut (62) on lever (8).3Install shaft (60) and lever (8) on bracket (34).4Install lubrication fittings (58 and 59) on shaft (60).5Install brake pedal (4) on shaft (45) with screw (57).6Install two bearing assemblies (55) and key (56) on shaft (45).7Install two washers (54) and two retaining rings (53) on shaft (45).8Install lubrication fitting (52) on shaft (45).9Install assembled brake pedal (4) on support (51) with four caps (48), four screws (49), and four newlockwashers (50).10Install lever (43) and key (44) on shaft (45) with screw (46) and new lockwasher (47).11Lubricate in accordance with Appendix J.12Install brake pedal and support assembly (42) with two screws (40) and two new lockwashers (41).13Install screw (38) and nut (39) on cam rod (33).14Install cam rod (33), cam (35), spring (36), and collar (37) on bracket (34).15Install straight pm (32) and new cotter pin (31).16 Lubricate in accordance with Appendix J.9-202Change 1
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
