SECTION V: CONTROLS AND LINKAGES
TM 9-2350-256-20
4
Remove two screws (40), two lockwashers (41), and brake pedal and support assembly (42).
5
Remove lever (43) and key (44) from shaft (45) by removing screw (46) and lockwasher (47).
6
Remove four caps (48) by removing four screws (49) and four lockwashers (50). Remove brake pedal (4), with
shaft (45), from support (51).
7
Remove lubrication fitting (52) from shaft (45).
8
Remove two retaining rings (53) and two washers (54) from shaft (45).
9
Remove two bearing assemblies (55) and key (56) from shaft (45).
10
Remove brake pedal (4) from shaft (45) by removing screw (57).
11
Remove lubrication fittings (58 and 59).
12
Remove shaft (60) and lever (8) from bracket (34).
13
Remove screw (61) and nut (62) from lever (8).
14
Remove pin (63) from bracket (34).
9-201
