CHAPTER 2: VEHICLE MAINTENANCE INSTRUCTIONS
TM 9-2350-256-20
2-19 ELECTRICAL TROUBLESHOOTING-Continued
POWER CONTROL LEVER SWITCH--Continued
WARNING
Remove all jewelry such as rings, dog tags,
bracelets, etc. If jewelry contacts a metal
surface a direct short may result in instant
heating of tools, damage to equipment,
and injury or death to personnel.
A
Remove three screws (1), three lockwashers (2),
ground lead (3), flat washer (4), and release main
switch panel (5) from mounting brackets. Disconnect
switch panel to gage panel and miscellaneous switches
wiring harness from switch panel. Place red lead of
multimeter on pin N of wire 10 and black lead to
ground. Turn MASTER switch on and check for
voltage. Turn MASTER switch OFF. If voltage is
present, go to step C. If voltage is not present, go to
step B.
2-110