SECTION V: TROUBLESHOOTING
TM 9-2350-256-20
WARNING
Remove all jewelry such as rings, dog
tags, bracelets, etc. If jewelry contacts a
metal surface a direct short may result in
instant heating of tools, damage to
equipment, and injury or death to
personnel.
D
Remove three screws (7), three lockwashers (8),
ground wire (9), flat washer (10), and release main
switch
panel
(11)
from
mounting
brackets.
Disconnect
switch
panel
to
gage
panel
and
miscellaneous switches wiring harness from main
switch panel. Place red lead of multimeter on pin N
of wire 10 and black lead to ground. Turn MASTER
switch on and check for voltage. Turn MASTER
switch OFF. If voltage is present, go to step E. If
voltage is not present, go to step K.
2—
301
