CHAPTER 8 MAINTENANCE OF SUSPENSION SYSTEM

INSTALLATION (cont) - TM-9-2350-256-20_839

TM-9-2350-256-20 Carrier Cargo Tracked 6-Ton M548A1 (2350-01-096-9356) M548A3 2350-01-369-6081 Manual
Page Navigation
827

TM 9-2350-256-20 CHAPTER 8 MAINTENANCE OF SUSPENSION SYSTEM CHAPTER OVERVIEW This chapter describes how to remove, disassemble, clean, inspect, assemble, and install the suspension system components. This chapter consists of the following sections: Page Section I: Wheels and Tracks .........................................................8-1 Section II: Springs and Shock Absorbers ........................................8-36 SECTION I: WHEELS AND TRACKS Para. Task Page 8-1 Replace Roadwheels ...........................................................................................................................8-1 8-2 Replace Torsion Bar and Torsion Bar Anchors.....................................................................................8-3 8-3 Replace Roadwheel Arm Assembly ....................................................................................................8-6 8-4 Replace/Service Roadwheel Hub Assembly.........................................................................................8-9 8-5 Replace Roadwheel Support Housing ..................................................................................................8-13 8-6 Replace/Repair/Service Track Support Roller, Bracket, and Wheel .....................................................8-14 8-7 Replace/Repair/Service Left Front Track Support Roller, Bracket, and Wheel ....................................8-19 8-8 Replace Compensating Idler Arm Assembly Wheels, Hub Assembly, Links, and Link Bearings ..........8-25 8-9 Replace/Service Compensating Idler and Arm Assembly.....................................................................8-28 8-10 Replace Final Drive Sprocket and Hub ................................................................................................8-32 8-1 REPLACE ROADWHEELS THIS TASK COVERS a. Removal b. Installation INITIAL SET-UP Tools: Reference: • Tool kit, general mechanic's (Appendix C, TM 9-2350-256-10 item 53) • Lifters (Appendix C, item 26) Equipment Condition: • Wrench, torque, 0-600 pound-feet (lb-ft) (0-813 Track tension loosened (refer to TM 9-2350-256-10) newton-meters [N-m] ) (Appendix C, item 63) • Multiplier, torque wrench (Appendix C, item 27) • Socket set (Appendix C, item 48) 8-1

Privacy Statement
Press Release
Contact