REPLACE TORSION BAR AND TORSION BAR ANCHORS

TM-9-2350-256-20 Carrier Cargo Tracked 6-Ton M548A1 (2350-01-096-9356) M548A3 2350-01-369-6081 Manual
Page Navigation
829

SECTlON I: WHEELS AND TRACKS TM 9-2350-256-20 8-2 REPLACE TORSION BAR AND TORSION BAR ANCHORS THIS TASK COVERS a. Removal b. Installation INITIAL SET-UP Tools: • Tool kit, general mechanic’s (Appendix C, item 53) • Adapter, puller, torsion bar (Appendix C, item 1) • Puller, slide-hammer type (Appendix C, item 36) • Wrench (Appendix C, item 57) • Wrench, plug (Appendix B, item 107) • Wrench, torque, 0-175 lb-ft (0-237 N•m) (Appendix C, item 61) Material/Parts: • Grease, GAA (Appendix D, item 13) • Gaskets (12) (Appendix G, item 28) Material/Parts-Continued: • Gaskets (12) (Appendix G, item 31) • Lockwashers (12) (Appendix G, item 134) • Lockwashers (48) (Appendix G, item 144) Reference: Deleted Equipment Conditions: • Roadwheel removed (see paragraph 8-1) • Compensating idler link (see paragraph 8-8) and shock absorber (see paragraph 8-12) disconnected a. REMOVAL 1 Remove screw (1) and lockwasher (2) from roadwheel arm (3). 2 Remove torsion bar end plug (4) and gasket (5). Change 1 8-3

Privacy Statement
Press Release
Contact