SECTION 1: WHEELS AND TRACKS
TM 9-2350-256-20
7 Remove outer bearing (14) with bearing race (15).
8 Remove arm retainer (3).
9 Remove oil seal (16).
10 Remove spacer (17) and dirt shield (18).
b. INSTALLATION
1 Install dirt shield (18) and spacer (17).
2 Install new oil seal (16) on roadwheel arm retainer
(3) using replacer and handle.
3 Install assembled roadwheel arm retainer (3) on
roadwheel arm assembly (4).
4 Install outer bearing (14) with bearing race (15).
Apply light coat of grease.
5 Install spacer (13) and inner bearing (11) with
bearing race (12). Apply light coat of grease.
8-7
