TM 9-2350-256-34
0068 00
6.
Install stayline cable assembly (12) and shoulder bolt (11) to crank arm (13).
NOTE
Support boom actuating cylinder (4) while installing piston eye pin (10).
7.
Align pin holes with tapered drift and install piston eye pin (10) using wood block and hammer.
NOTE
If boot (3) is replaced, use part number 11672351 and adhere joining strips at installation using adhesive.
8.
Install retainer (9), two lockwashers (8), and capscrews (7). Move boot (3) into position covering piston eye pin (10).
9.
Install 20 lockwashers (6) and screws (5) securing boot (3) in position.
10. Tighten screw (1) on clamp (2) securing boot (3) to boom actuating cylinder (4).
11. Repeat steps 3 thru 10 for other side.
0068 00-6