TM 9-2350-256-34
0068 00
Removal
1.
Loosen screw (1) on clamp (2) holding boot (3) to boom actuating cylinder (4).
2.
Remove 20 screws (5) and lockwashers (6) from boot (3). Discard lockwashers.
3.
Slip boot (3) down and remove two capscrews (7), lockwashers (8), and retainer (9) from piston eye pin (10). Discard
lockwashers.
NOTE
Support boom actuating cylinder (4) while removing piston eye pin (10).
4.
Using adapter and puller, remove piston eye pin (10).
5.
Remove shoulder bolt (11) and stayline cable assembly (12) from crank arm (13).
6.
Remove two screws (14), lockwashers (15), and retainer (16). Discard lockwashers.
7.
Attach sling to hoisting boom assembly (18) as near as possible to its balance points.
NOTE
Use sling to hold weight of hoisting boom assembly (18) while pulling boom pin (17).
0068 00-2