TM 9--2350--292--20--1
0221 00--5
FUEL/WATER SEPARATOR OPERATION TESTS -- CONTINUED
0221 00
Automatic Drain Test--Continued
CAUTION
Do not damage fuel/water separator gasket when remov-
ing cover. Failure to comply will result in leaks to the fuel/
water separator.
10. Remove eight screws (15), eight lockwashers (16), eight flat washers (17) and fuel/water separator cover (18).
11. Add fuel to fuel/water separator (1) until fuel leaks from upper sensor probe (2) hole. Install screw (12).
12. Install fuel/water separator cover (18) with eight screws (15), eight lockwashers (16) and eight flat washers (17).
WARNING
Do not allow upper and lower sensor probes to come in
contact with each other or with metal container. Do not
touch probes. Failure to comply may result in electrical
shock, inaccurate test results or damage to equipment.
13. Hold tips of upper and lower sensor probes (2 and 3) in water in suitable metal container.
Figure 29
SUITABLE METAL
CONTAINERS
1
18
17
16
15
12
2
3
2
(+)
(--)
