TM 9--2350--292--20--1
0280 00--4
TROUBLE LIGHT ASSEMBLY REPAIR -- CONTINUED
0280 00
Assembly
NOTE
Before proceeding, see detailed instructions on soldering
and solder (TB SIG 222).
1. If previously removed, install cable retainer (33) on cord reel cable (32).
2. Install shrink tubing in accordance with WP 0290 00.
3. Solder one wire (31) of cord reel cable (32) to switch terminal of switch and bracket assembly (29). Solder se-
cond wire (19) from wire splice A (18) in shell (22) to other switch terminal.
4. Install switch and bracket assembly (29) to bottom half of pistol grip handle (23) with two screws (28).
5. Lay cord reel cable (32) with cable retainer (33) on inside of bottom half of handle (23). Ensure remaining wire of
cord reel cable is of sufficient length to reach through the handle to wire splice B (18) in shell (22).
CAUTION
Do not pinch wires during handle assembly.
6. Position top half of pistol grip handle (23) over bottom half of handle and fasten together with screw (30).
7. Feed wires from handle through large hole in shell (22) and together with wires from lamp socket (15) connect
wires (19) with wire splices (18). Connect wires according to tags previously attached during disassembly.
Figure 95
15
17
17
17
A
A
B
B
18
18
19
29
28
31
33
30
23
28
22
32
Figure 40
