Assembly - TM-9-2350-292-20-1

TM-9-2350-292-20-1 Carrier Ammunition Tracked M992A1(NSN 2360-01-362-3021) EIC:AE6 Manual
Page Navigation
1382

TM 9--2350--292--20--1 0290 00--3 WIRING HARNESS AND CABLE REPAIR -- CONTINUED 0290 00 CRIMPED TERMINALS -- CONTINUED Assembly 1. Strip cable insulation equal to depth of terminal (1) well. 2. Push cable (2) against end of terminal (1) well and crimp. 3. Apply epoxy to exposed end of wire (3) 2 1 3 TERMINAL TYPE CABLE CONNECTORS Disassembly Cut and discard connector. Assembly 1. Strip cable insulation equal to depth of terminal well. 2. Slide insulator (1) over cable (2). 3. Insert cable (2) into terminal (3) well and crimp. 4. Slide insulator (1) over crimped end of terminal (3). 1 2 3 FEMALE CABLE CONNECTOR WITH WASHER Disassembly Cut and discard connector. Assembly 1. Strip cable insulation approximately 1/8 inch (3.2 mm). 2. Slide shell (1) and washer (2) over cable (3). 3. Place cable (3) in cylinder end of terminal (4). 4. Slide shell (1) and washer (2) over terminal (4). 1 2 4 3

Privacy Statement
Press Release
Contact