TM 9--2350--292--20--1
0290 00--6
WIRING HARNESS AND CABLE REPAIR -- CONTINUED
0290 00
TYPICAL FEMALE--TYPE PANEL MOUNTING RECEPTACLE -- CONTINUED
Assembly
1. Strip leads (6) insulation equal to depth of wells in socket contacts (5).
2. Insert leads (6) into wells in socket contacts (5) and solder or crimp leads (6) to contacts (5).
3. Push socket contacts (5) into shell (3) from rear until seated.
4. Install nut (2) on shell (3).
5. Apply a thin coat of adhesive to boot (1).
6. Install boot (1) on nut (2).
1
3
2
5
5
4
6
TYPICAL FEMALE--TYPE PANEL MOUNTING RECEPTACLE WITH RIDGED LOCKING NUT
Disassembly
1. Unscrew nut (1) from shell assembly (2) and slide back on cable (3).
2. Slide grommet (4) back on cable (3) leads.
3. Drive socket contacts (5) out through rear of shell (6) with socket extractors.
4. Unsolder leads from socket contacts (5).
1
6
5
4
3
2
