TM 9--2350--292--20--10290 00--10WIRING HARNESS AND CABLE REPAIR -- CONTINUED0290 00WATERPROOFING CONNECTORS ON WIRING HARNESSES 3W200, 3W201, 3W206, 3W207, 5W902 AND5W903Disassembly1. Heat boot (1) on shell assembly (2) and roll back on cable (4).2. Unscrew nut (3) from connector (5) and slide back on cable (4).Assembly1. Apply sealing compound on threads of shell assembly (27).2. Screw nut (3) onto connector (5).3. Apply an even layer of adhesive (item 103, WP 0716 00) on the shell assembly (2) and roll boot (1) onto the shellassembly (2). Ensure the cavity between shell assembly (2) and boot (1) is filled with adhesive (item 103,WP 0716 00).4. Place a three--inch heat shrinkable sleeving (6) over at least a quarter of nut (3) to half way down the boot assem-bly (1).5. Using a heat gun, heat sleeving (6) until a water tight fit is achieved. Shim sleeving as needed to attain a watertight fit.126354
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
